VIEW 600—Modular OTDR with high performance

The INNO Instrument View 600 can handle all measurement tasks in optical networks. Thanks to its modular design, it can be equipped with 13 different modules and therefore leaves nothing to be desired. In addition to the extremely precise measurement results, the very powerful CPU allows a very short reaction time.

In combination with the high-quality capacitive touch screen and the intuitive user interface, already known from other devices, the View 600 convinces in every respect.

• 13 modules applicable
• SOLA (Smart Optical Link Analyzer)
• 7″ Touch screen with smart GUI
• 8 GB storage with internal SD Card & external USB memory
• Built-In VFL, light source and OPM

OTDR (Optical Time Domain Reflectometer)

OTDR mode allows you to measure distance, loss, reflectance, attenuation, ORL and sum on an optical fiber. In Auto mode, the test is automatically performed without further adjustments. Test results can be stored in 3 types of formats (image, SOR, PDF).

SOLA (Smart Optical Link Analyzer)

SOLA (Smart Optical Link Analyzer), an application that simplifies the measurement process, shows you accurate test results using an advanced algorithm and an optimal multiple pulse width. You do not need to set complicated parameters, which means that even unskilled workers can perform measurements with great ease.

VFL (Visual Fault Locator)

VFL (Visual Fault Locator) visually identifies the location of the bending point, defective connector or splice point by emitting a bright red laser (it can reach a maximum of 10 km), and this is an essential function for field technicians.

Fiber microscope

Testing the end-face of the fiber on connectors with a fiber optic microscope is very important, as a contaminated or damaged connector can cause critical damage to the test results as well as to the test port.

OPM (Optical Power Meter)

OPM (Optical Power Meter) is used to accurately measure optical power on fiber optic networks operating at 850 nm, 1,300 nm, 1,310 nm, 1,490 nm, 1,550 nm, 1,610 nm and 1,625 nm.

Light source

Invisible light source (1,310 / 1,550 nm) can provide the following sources of light: CW, 1 kHz, 2 kHz modulated and 1 kHz & 2 kHz blink.

Specifications

• Model: View 600
• Display: 7 inches, high brightness TFT LCD, resolution of 800 × 480 px
• Distance units: m / km / mile / ft
• Range settings (km): 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360 km
• Range settings (mile): 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 232.7 mile
• Pulse width: 5 ns, 10 ns, 20 ns, 50 ns, 100 ns, 200 ns, 500 ns, 1 μs, 2 μs, 10 μs, 20 μs
• Distance accuracy: ± (1 m + distance × 2.5 × 10−5 + sampling resolution)
• Linearity: 0.03 dB
• Sampling points: 256,000 points
• Refractive index: 1.000000—2.000000 (step: 0.000001)
• Splitting ratio: Up to 1:128 splitter
• Resolution: 0.04 m ~ 10.24 m
• Loss readout resolution: 0.001 dB
• Battery capacity: Operating time: Up to 12 hours
• File format: SOR, BMP, JPG, GDM, SOLA, PDF
• External connection: 2× USB 2.0
• Compatible connector: APC (FC, SC, LC), UPC (FC, SC, LC, ST)
• Power supply: AC Input 100—240 V, 50—60 Hz / DC Input 19 V, 3.42 A
• VFL port: 2.5 mm ferrule type
• VFL wavelength: 650 nm ± 10 nm
• VFL distance: Up to 10 km
• VFL output power: 20 mW
• Light source: Operating wavelength 1,310 nm / 1,550nm ± 10 nm
• Light source output power: −5 dBm
• Wave lenght: 1,310 nm / 1,550 nm
• Wavelength calibration (OPM): 850 / 1,300 / 1,310 / 1,490 / 1,550 / 1,625 / 1,650
• Power range (OPM): −70 to +6 dBm (Accuracy: 0.01 dB)

Software features

• Softwareupdate: Simple update with USB memory stick
• Auto mode: Automatic optimization of parameters and test process
• INNO PC Program: A tool for analyzing and revising the test results of OTDR and SOLA
• PDF reporting: Providing the test report in PDF format
• PDF viewer: PDF file can be viewed on the screen
• Transmission via USB / Wi-fi: Quick transmission of test results via USB and Wi-Fi
• Link with printer: Printing by connected printer
• Distance editing: Manually changing distance on OTDR mode
• Identifying macro-bending: Identifying micro-bending on OTDR or SOLA mode
• Operation with mouse: Easy operation with mouse (linked to USB port)

Delivery contents

• OTDR View 600
• Power cable / AC adapter: ACC-25 / JS-180300
• Carrying case with shoulder strap: Soft case
• Touch pen
• Calibration certificate

APC connector

To improve test efficiency and optimize the OTDR function, it is recommended to use the APC connector and plug it to the MINI 2 SM port, due to the low reflectance it causes. The reflection coefficient is the key parameter that will affect OTDR performance and particularly the dead zone (APC connector performance is better than UPC connector performance).