The LanTEK IV-S is a new Cable Certification System that brings a new standard to the industry, making the job faster, easier and more profitable.

The new LanTEK IV-S technology provides faster test times. Engineers and technicians can conduct and save a Cat. 6A test within 7 seconds, assisted by the intuitive user interface and easy to use high resolution touchscreen. In addition, the tester's enhanced functionality certifies links up to Cat. 8, including TCL/ELTCTL and Resistance Unbalance and will sweep to 3000 MHz providing room for future ratified ISO and TIA test standards.

LanTEK IV-S also provides the patent pending VisiLINQ permanent link adapter, a new and unique way to test that allows users to initiate testing and view the results without even needing to hold the certifier. This allows technicians to work smarter, saving time and increasing productivity. The RJ45 tip on the VisiLINQ Permanent Link Modules are also field replaceable to reduce the cost of ownership.

For example, the tough new LanTEK IV-S cable certifier can connect to Wi-Fi and to the new TREND AnyWARE Cloud test management system to enable real time collaboration between Project Managers and Field Technicians. This new functionality enables project information and test setup to be pre-configured, saving time and eliminating potentially costly setup errors. TREND AnyWARE Cloud also makes it quicker and easier than ever to prepare and share reports for customers and warranties.

With enhanced connectivity, LanTEK IV-S also makes Live support possible. Colleagues, cable manufacturers and our Technical Support team can all connect to LanTEK IV-S remotely, helping to increase collaboration, minimise troubleshooting time and reduce call-backs.

We have been developing high quality cable certifiers for 26 years and have brought many firsts to the industy. With the new LanTEK IV-S we over another unique innovation which sets new standards and will change the way we certify, now and in the future.

• VisiLINQ Permanent Link Adapter enables Field Technicians to initiate testing and view the results all without the need to carry or touch the certifier.
• 7 seconds test time - Test a Cat. 5e / 6 / 6A cable within 7 seconds.
• Certify Cat. 8 cabling - Including TLC/ELTCTL, CD NEXT (Common/Diffential NEXT), Resistanace Unbalance.
• Model LanTEK IV-S-3000 measures up to 3000 MHz for future ISO and TIA test standards.
• TREND AnyWARE Cloud / Desktop Software.
• Partner Finder - Provides audible tone and visible indicator when connected to the remote unit.
• Live Wiremap - Instand wiremap result before the Autotest begins.
• Label Printer Connectivity - Easily send label IDs to printers for fast and accurate labelling.
• Team Viver Live Support - Using the TREND AnyWARE Cloud users can connect ot a LanTEK IV-S remotely to troubleshoot failed links.

Pressure on networks is increasing and downtime is expensive. Fix it fast with SignalTEK 10G. 

The SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards. SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free TREND AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and “proof of performance” PDF reports for the clients. 

Why do I need a 10G Ethernet Tester? 

Problem  
LAN networks are at risk of expensive downtime and lost productivity due to the ever-increasing demand of bandwidth hungry services such as video streaming, video conferencing, CCTV cameras and Wi-Fi access points. 

Solution  
SignalTEK 10G will measure the maximum bandwidth available of the network, identify bottlenecks and discover opportunities to increase bandwidth without replacing expensive data cabling. 

Avoid network downtime
Troubleshoot Ethernet connectivity issues faster using diagnostic tools.
Pinpoint bottlenecks faster
Discover which part of your network is causing the bottleneck.
Validate network upgrades
Verify Multi-Gigabit switch upgrades to 2.5/5 and 10Gb/s speeds.
Prove the maximum bandwidth
Provide “proof of performance” PDF reports to the client. 

SignalTEK 10G offers the extensive features of a wiremapper, network tester, PoE tester and 10G transmission tester, as well as options for fiber optic testing and advanced network testing, depending on the model. The additional features can also be activated at a later time if required via a simple license key, two upgrade options – fiber optic tests and advanced network tests – are available. 

Specification:      

Speed

• Max bandwidth test up to 10Gb/s
• Data transmission test 2.5/5/10Gb
• NbaseT/mutigig validation 2.5/5/10Gb

Test

• Distance to fault and length
• Cable tracing (with compatible probe)

Verify

• Pass / Fail to copper and fibre Ethernet standards

 Fibre

• Optical Rx power indication

PoE

• Pass / Fail to PoE IEEE standards
• Displays voltage and which pairs have PoE
• Measures max power available (up to 90 watts)
• Identifies Power Sourcing Equipment Class – 0 to 8
• Identifies Power Sourcing Equipment Type (af/at/bt)

Network

• Switch Speed - 100M, 1000M, 2.5G, 5G, 10G
• Hub blink VoIP Testing with jitter and delay
• VLAN ID detection 72 hour event log
• Prove actual network performance (up to 10G)
• CDP/LLDP/EDP port information
• PING and TraceRoute

VDV II series and PoE Pro verifier Cloud-Connected with Bluetooth/report function for basic testing of the IT cabling structure. The VDV II series is easy to use and allows the verification of copper cables of voice, data and video installations, such as telephone lines, data lines and video/security systems, of residential and commercial buildings. Real-time storage of test results through the free AnyWARE Cloud App on the mobile device and seamless transfer to the AnyWARE Cloud for professional reporting. The integrated tone generator enables cable tracing with a compatible inductive receiver. Optional remote adapter kits are available for efficient work and testing on multiple connections.

The new "Cloud Connected" class with Bluetooth/report function for professional reporting. 

Wiring test
Precise fault localization
TDR  
Length determination
PoE detection
Immediate result output
Determination of the network rate up to 10G ●
Voltage warning
Built-in tone generator
Port identification/hub link

(functions depending on model)

The new FiberMASTER series of fibre optic testers will make it easier and faster to verify, troubleshoot and certify fibre optic cabling. The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON. The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/ fail results. Additionally custom test parameters are easily set to accommodate any application. OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below. For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows inservice testing of networks without interrupting existing subscribers. The power meter / light source is used to measure attenuation in multimode or single-mode cabling. The power meter’s high dynamic range also allows troubleshooting of LAN and Telecom networks. Both the power meter and light source support the fibre inspection probe to capture images of the connector on each end of the cabling. All OTDRs include a power meter and when partnered with a FiberMASTER light source, the OTDR can be used to directly measure cable attenuation or to measure the output power of optical equipment for troubleshooting. Fibre Inspection Probe with Automatic Certification to IEC61300-3-35 Standard 90% of all fibre optic cable and network issues arise from dirty and/or damaged fibre connectors which is why the Fibre Inspection Probe is an essential piece of equipment for any fibre cable installer or technician. Specification: 

• ORL measurement range to -60 dB
• 82 dB power meter dynamic range
• Compatible with the auto-centring/Pass/Fail video probe
• Auto test up to three wavelengths
• Auto wavelength switching
• Universal power meter and light source adapters
• Storage up to 40,000 tests
• Bright colour display
• Rechargeable lithium battery
• USB interface
• CertSoft free reporting software
• On-board help feature
• Pass/Fail to IEC61300-3-35 Standard
• 150x and 300x zoom level • Automatic image positioning
• Stores images in FiberMASTER testers
• Attach images to OTDR / Power Meter test report
• Wide range of connector adapters available •

 One hand operation

The NaviTEK IE is a tester for commissioning, preventative maintenance and troubleshooting of PROFINET Industrial Ethernet networks as well standard Ethernet IP networks.

Designed to simplify the process, the NaviTEK IE identifies network nodes and configuration without requiring a PC and speciality software. An easy to understand system health check pinpoints potential issues before they become network failures. Automatically discover cable, network or device configuration/faults with the touch of a button. To prove the network has been commissioned successfully, NaviTEK IE provides professional PDF reports that can be shared with colleagues and clients using the free TREND AnyWARE mobile app.

• M12 PROFINET Cable Testing
• PROFINET Fibre Cable Testing
• Traffic light network health check
• Device LED flash to locat devices faster
• NETMAP compare - identify changes in the network
• Configure node settings without the need for a laptop
• List all network node details ie IP Address, Vendor details, Software version etc.
• Ability to reset device to factory defaults
• Device alarm/error detection
• Professional Industiral Ethernet PDF Reports